Using Arcsoft Videoimpression - CONCORD Eye-Q Go Wireless User Manual

CONNECTING THE CAMERA TO THE COMPUTER
USING ARCSOFT VIDEOIMPRESSION (WEB MODE)
You can record live video clips on your computer by using the ArcSoft
VideoImpression software.
Note: You cannot download video clips that are stored in the internal memory or
the memory card in this mode. (The Pic drive mode should be used.)
To Capture and Record Video Clips on the Computer:
1. Set the camera to Web mode.
• Set the Mode Switch to (
• Press the MENU button to display the main
menu.
• Press until Setup is highlighted.
• Press to enter the Setup submenu.
• In the Setup menu, press
highlighted.
• Press to change the setting to Web.
• Press the Menu button to exit.
2. Connect the camera to the computer.
3. Launch the ArcSoft VideoImpression software by clicking on Start-Programs-
ArcSoft Camera Suite and choose VideoImpression from the application list on
your screen.
4. Click on the NEW icon.
5. Click on the CAPTURE icon.
6. Click on the RECORD icon. To stop recording, press the ESC button on your
keyboard or click the PAUSE icon on your screen.
Note: If the video is not displayed, select "Concord Eye-Q Go Wireless Video
Clips" in the Driver List and click on the Live icon to view live video.
To save your video, simply click on the SAVE icon and follow the onscreen
instructions.
To edit, manipulate or create video clips using all the features that VideoImpression
offers, refer to ArcSoft's help section for a tutorial.
).
until Driver is
80