Connecting/Disconnecting Your Camera From The Computer - CONCORD Eye-Q Go Wireless User Manual

CONNECTING THE CAMERA TO THE COMPUTER
Connecting the camera to the computer:
1. Set the driver mode to Pic or Web.
• Set the Mode Switch to (
• Press the MENU button to display the main menu.
• Press until Setup is highlighted.
• Press to enter the Setup submenu.
• In the Setup menu, press
highlighted.
•. Press to change the setting to Pic or Web.
2. Power the camera off.
3. Connect the camera to the computer with the Mini-
USB cable provided.
• Plug the larger end of the Mini-USB cable that is included with the camera
into your PC's USB port. (Please refer to your computer's documentation for
more information on the location of the USB port.)
• Plug the small end of the Mini-USB cable into the USB port located in the
Cable Connection panel on the side of the camera.
4. When the camera is connected to the computer for the first time, the camera's
USB Mass Storage driver installation will begin. Please follow the on-screen
instructions to complete the installation.
).
until Driver is
76