Installing The Driver And Directx 9 - CONCORD Eye-Q Go Wireless User Manual

INSTALLING THE CAMERA DRIVERS AND DIRECTX 9
NOTE: Do not connect the camera with a usb cable (for non-bluetooth
transmission) to your computer before the camera drivers and Microsoft
DirectX 9.0 installation is completed.
The installation Windows messages displayed on the computer screen may
vary due to the different operating systems, but the installation procedures are
the same.
Step 1 Make sure your camera is powered off and not connected to the
computer.
Step 2 Make sure the computer is powered on and Windows is running.
Step 3 Close any other applications or software you may be running.
Step 4 Insert the CD-ROM entitled PC Installation Disk included in your
camera's packaging into your computer's CD-ROM Drive.
NOTE: If the installer does not automatically start within 30 seconds
after having inserted the CD-ROM, double-click on My Computer on
the desktop or click on Start, select My Computer and locate the
CD-ROM Drive. Double click on the CD-ROM Drive icon to show its
contents. Double-click on the file named SETUP.EXE and proceed to
Step 5.
Step 5 Select a language.
Click OK.
CAMERA DRIVERS AND SOFTWARE INSTALLATION GUIDE
65