Transfer Pictures To The Computer With Bluetooth - CONCORD Eye-Q Go Wireless User Manual

TRANSFER PICTURES TO THE COMPUTER WITH BLUETOOTH

TRANSFER PICTURES TO THE COMPUTER WITH BLUETOOTH
Note: Do not connect the USB Bluetooth Wireless Adaptor to the computer
before installing the drivers. Please refer to page 44.
Once you have transferred pictures to the Bluetooth In Box it is important that
you save the pictures to your hard drive or rename the pictures before sending
new pictures to the Bluetooth In Box. The camera uses a sequential numbering
system to name the pictures which means that numbers will repeat. When
transferring pictures to the Bluetooth In Box, the computer will overwrite any
picture in the In Box that has the same number as a picture being transferred.
To ensure that you do not lose pictures, rename or save pictures in the
Bluetooth In Box.
Step 1 Make sure the computer is powered on and Windows is running.
Step 2 Power on your camera.
Step 3 Remove the cap on the USB
Bluetooth Wireless Adaptor.
Step 4 Plug the USB Bluetooth Wireless
Adaptor into the USB port located in the
back or front of your computer.
For more information on the location of
the USB port, please refer to your
computer's documentation.
• Keep a distance of no more than
30 feet (10 meters) between the camera and the USB Bluetooth
Wireless Adaptor (2 meters is recommended).
54