Using Arcsoft Photoimpression - CONCORD Eye-Q Go Wireless User Manual

USING ARCSOFT PHOTOIMPRESSION (PIC MODE)
1. Set the camera to Pic mode.
• Set the Mode Switch to (
• Press the MENU button to
display the main menu.
• Press until Setup is
highlighted.
• Press to enter the Setup
submenu.
• In the Setup menu, press
until Driver is highlighted.
• Press to change the
setting to Pic.
• Press the Menu button to exit.
2. Connect the camera to the
computer. (p.75)
3. Launch ArcSoft PhotoImpression software by clicking on Start-Programs-ArcSoft
Camera Suite and choosing PhotoImpression from the application list on your
screen when the Application opens.
4. Click on the [Camera/Scanner] button. (a)
5. Click on the drop-down list under Select
Source and choose Concord Camera. (b)
6. Click on the Camera/ Scanner Icon. (c)
• A second window will appear showing the contents (pictures) and options on
how to handle them. (d)
7. Select the picture you would like to view, edit or save by clicking on it. The
selected image will be highlighted by a border. You may also click on Select All
to choose all pictures.
8. Click on "Get Photos" (e).
9. The pictures will then be added to your album at the bottom of the application. (f)
To access these, click CLOSE on the Camera Controls windows. Double-click on
the thumbnail to open.
10. You are now ready to print, store or further enhance your pictures. Please refer
to ArcSoft's Software help section for a tutorial on all the features
PhotoImpression offers.
CONNECTING THE CAMERA TO THE COMPUTER
).
79