Concord Camera Eye-Q 3X Instruction Manual page 13

TAKING PICTURES (CONTINUED)
While looking into the viewfinder, observe the red LED ❶ status. The red
LED indicates the following:
LED IS OFF:
OK to proceed.
LED IS BLINKING:
- Indicates that Flash is Charging. Wait until LED turns
completely off (approx. 4 seconds) before taking your
picture
Note: (The Flash Icon on the LCD Display will also be
blinking while the flash is being charged).
LED IS LIT:
This indicates one of the two possibilities (or both):
A: Memory is Full. Download Pictures to the PC or delete a
few pictures from memory before continuing.
B: Battery is weak. Replace the battery with a new one
before continuing.
5
A
ERA REVIEW
Now you are ready to take your picture!
Press the SHUTTER/OK button ❷ all the way
down and release:
- The viewfinder will then temporarily turn black
while the camera is focusing your picture and
capturing it into memory.
- The image just captured will then be displayed
on the Microdisplay (Review mode) for about 5
seconds, and then the camera will revert to
2
"Camera Mode". You are now ready to shoot
another picture!
IMPORTANT: Do not move the camera while the
viewfinder is black,. Wait until the image just taken
appears on the Microdisplay.
13
1
1