Loading The Batteries; Checking The Battery Level - Concord Camera 2040 User Manual

LOADING THE BATTERIES

fig.1.1
The camera uses 2x AA batteries.
1. Slide the Battery/Memory Card Door towards the center of the camera, and lift the
Battery/Memory Card Door to open.
2. Insert the batteries with the positive terminal toward the ( + ) sign, and the negative
terminal toward the ( – ) sign.
3. Close the battery/memory card door.

CHECKING THE BATTERY LEVEL

The battery level is displayed on the LCD.
Note:
• Remove the battery from the camera if it will not be used for an extended period of time
to prevent corrosion or battery leaks.
• To extend battery life, the camera will automatically power off after 60 seconds of
inactivity. To change this setting, please refer to page 25.
fig.1.2
(Green, Full)
The battery is full
and ready to use.
6
GETTING STARTED
fig.1.3
(Red, Low)
The battery is low
and it needs to
be replaced soon