Rack Mounting Procedures - Extron electronics EDID 101D User Manual

Installation and Operation, cont'd

Rack mounting procedures

The unit can be mounted in the front or rear of any of these rack
systems:
•
•
•
•
•
•
To rack mount the EDID 101D/EDID 101V:
1.
2.
3.
4.
Rack mounting the EDID 101
EDID 101D/EDID 101V • Installation and Operation
6
RSF 123 rack shelf kit for 3.5" deep products
(part #60-190-20)
RSB 123 basic rack shelf kit for 3.5" deep products
(part #60-604-20)
RSU 126 universal rack shelf kit for 6" deep products
(part #60-190-10)
RSB 126 basic rack shelf kit for 6" deep products
(part #60-604-10)
RSU 129 universal rack shelf kit for 9.5" deep products
(part #60-190-01)
RSB 129 basic rack shelf kit for 9.5" deep products
(part #60-604-01)
EighthRackVersaToolsShelf
If necessary, remove the rubber feet.
Secure the EDID 101 to the shelf with two 4-40 x 3/16"
screws in opposite corners of the base (see below).
Install false faceplate(s) or other unit(s) to the rack shelf.
Attach the shelf to the rack with the four provided
10-32 x 3/4" bolts.
1/4 Rack Width Front
False Faceplate
Use 2 mounting holes on
opposite corners.
(2) 4-40 x 3/16"
Screws