Table of Contents
Advertisement
10. Basic operating panel
The pumps are fitted with this operating panel as
standard.
Fig. 12
Basic operating panel
Pos.
Symbol
Description
Grundfos Eye
Shows the operating status of the
1
pump.
For further information, see
section
Allows radio communication with
Grundfos GO Remote and other
products of the same type.
When you try to establish radio
communication between the
pump and Grundfos GO Remote
or another pump, the green
2
indicator light in Grundfos Eye on
the pump flashes continuously.
Press
panel to allow radio
communication with Grundfos
GO Remote and other products
of the same type.
11. Grundfos GO Remote
The pump is designed for wireless radio or infrared
communication with Grundfos GO Remote.
Grundfos GO Remote enables setting of functions
and gives access to status overviews, technical
product information and actual operating
parameters.
Grundfos GO Remote offers the following mobile
interfaces (MI).
1
2
15. Grundfos
Eye.
on the pump operating
Fig. 13
Grundfos GO Remote communicating
with the pump via radio or infrared
connection (IR)
Pos.
Description
Grundfos MI 301:
Separate module enabling radio or infrared
1
communication. You can use the module in
conjunction with an Android or iOS-based
smart device with Bluetooth connection.
11.1 Communication
When Grundfos GO Remote initiates communication
with the pump, the indicator light in the middle of
Grundfos Eye flashes green. See section
15. Grundfos
Eye.
Establish communication using one of these
communication types:
•
radio communication
•
infrared communication.
11.1.1 Radio communication
Radio communication can take place at distances up
to 30 m. The first time Grundfos GO Remote
communicates with the pump, you must enable
communication by pressing
operating panel. Later when communication takes
place, the pump is recognised by Grundfos GO
Remote and you can select the pump from the "List"
menu.
11.1.2 Infrared communication
When communicating via infrared light, Grundfos GO
Remote must be pointed at the pump operating
panel.
11.1.3 Startup guide
The first time Grundfos GO Remote communicates
with the pump, the startup guide starts to guide you
through the settings needed for the product to
operate in the given application. When the startup
guide has been completed, the pump is ready for
operation.
1
+
or
on the pump
13
Advertisement
Table of Contents
