Table of Contents
Advertisement
5. When done, click Apply.
2.4.2.2 IPv6 Firewall
2.4.2.2.1 Common
Steps to set up common IPv6 Firewall:
1. From the navigation panel, go to Advanced > Security > IPv6 Firewall >
Common.
2. Enable Firewall: Enable or disable the IPv6 firewall. When disabled, all IPv6
packages can input WiFi Router, output WiFi Router and forward without any
limitation.
3. Respond to Ping Request from WAN: This feature lets WiFi Router make a
response to ping request from WAN.
4. Enable MLD: Check [Yes] to allow MLD packages to be transferred to the WiFi
Router. Check [No] to deny MLD packages.
5. Click Apply.
68
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SAX1V1K and is the answer not in the manual?
Questions and answers
Can the router be configured to add 2.4 Ghz output while retaining current 5 Ghz output?
Can router be configured for both 2.4 Ghz and 5Ghz Operation at same time?
Yes, the Askey SAX1V1K router supports dual-band wireless operation with both 2.4 GHz and 5 GHz frequencies, allowing for simultaneous operation on both bands.
This answer is automatically generated
can wifi be turned off?
Yes, the Wi-Fi can be turned off on the Askey SAX1V1K by selecting “No” in the "Enable Radio" setting.
This answer is automatically generated