Table of Contents
Advertisement
14. Enable pool: Enable/Disable ipv6 pool.
15. Enable Pool Setting For Lan Host: Enable to set DHCP pool start and end values
for client IPv6 address assign range, it's disable by default.
16. DHCP Pool Start: DHCP pool start values for client IPv6 address.
17. DHCP Pool End: DHCP pool end values for client IPv6 address.
18. PD-Valid Lifetime: Prefix delegation for valid lifetime.
19. PD-Preferred Lifetime: Prefix delegation for preferred lifetime.
20. LAN IPv6 MTU: Set MTU for LAN-side devices.
21. Connect to DNS Server Automatically: Choose to acquire the DNS from uplink.
22. IPv6 DNS Server 1: IPv6 address for DNS server.
23. IPv6 DNS Server 2: IPv6 address for DNS server.
24. IPv6 DNS Server 3: IPv6 address for DNS server.
25. Port Ranges Valid for Port Forwarding: The "port ranges" are set by Map-T mode,
and the port setting for port forwarding must be in these ranges.
26. Click Apply.
2.4.1.5 Parental Control
Refer to 2.3.5
Parental Control
2.4.1.6 Multicast
Enable multicast. The sender and receiver can implement point-to-multipoint
connections.
for relevant setting descriptions.
60
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SAX1V1K and is the answer not in the manual?
Questions and answers
Can the router be configured to add 2.4 Ghz output while retaining current 5 Ghz output?
Can router be configured for both 2.4 Ghz and 5Ghz Operation at same time?
Yes, the Askey SAX1V1K router supports dual-band wireless operation with both 2.4 GHz and 5 GHz frequencies, allowing for simultaneous operation on both bands.
This answer is automatically generated
can wifi be turned off?
Yes, the Wi-Fi can be turned off on the Askey SAX1V1K by selecting “No” in the "Enable Radio" setting.
This answer is automatically generated