Table of Contents
Advertisement
2.4.1.3.3 ACL
ACL can be used to allow or disallow one device to associate to the AP/ Router.
Steps to set up the ACL:
1. From the navigation panel, go to Advanced > Network > Wireless > ACL.
2. Frequency: In the frequency field, select the frequency band that you want to use
for the ACL settings.
3. WiFi Network Name: A name whose length is less than 32 characters is used to
identify a wireless network.
4. Enable MAC Filter: Enable MAC filter or disable.
5.
MAC Filter Mode:
to the AP/ Router, select Reject to prevent devices in the MAC filter list from
Select Accept to allow devices in the MAC filter list to associate
50
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SAX1V1K and is the answer not in the manual?
Questions and answers
Can the router be configured to add 2.4 Ghz output while retaining current 5 Ghz output?
Can router be configured for both 2.4 Ghz and 5Ghz Operation at same time?
Yes, the Askey SAX1V1K router supports dual-band wireless operation with both 2.4 GHz and 5 GHz frequencies, allowing for simultaneous operation on both bands.
This answer is automatically generated
can wifi be turned off?
Yes, the Wi-Fi can be turned off on the Askey SAX1V1K by selecting “No” in the "Enable Radio" setting.
This answer is automatically generated