Askey SAX1V1K User Manual page 55

19. OBSS RSSI: Configure OBSS RSSI threshold. If OBSS RSSI is greater than configured
value, then only move to 20 Mhz.
20. RTS Threshold: Select a lower value for RTS (Request to Send) Threshold to
improve wireless communication in a busy or noisy wireless network with high
network traffic and numerous wireless devices.
21. Fragmentation Threshold: Set the fragmentation threshold, which is the
maximum fragment size.
22. Beacon Interval: Beacon Interval means the period of time between one beacon
and the next one. The default value is 100 (the unit is millisecond, or 1/1000
second). Lower the Beacon Interval to improve transmission performance in
unstable environment or for roaming clients, but it will be power consuming.
23. Current Beacon Interval: This Mode represents the current status.
24. HT AMPDU Factor: Enables or disables Tx AMPDU aggregation for the entire
interface. Receiving aggregate frames will still be performed, but no aggregate
frames will be transmitted if this is disabled.
25. VHT AMPDU Factor: Set VHT capability field, Maximum A-MPDU length exponent.
Value range is 0 to 7. Maximum A-MPDU length exponent indicates the maximum
length of A-MPDU that the station can receive.
26. DCS Enable: Enable or disable DCS function which is a feature to detect and avoid
CW interference.
27. When done, click Apply.
54