Table of Contents
Advertisement
Steps to set up Routing:
1. From the navigation panel, go to
2. Enable 1:1 NAT: Check [Yes] to enable this function, check [No] to disable this
function.
3. Name: A brief description for application.
4. Public IP: IP address from Charter supplied public IP subnets.
5. Local IP: Key in the client's LAN IP address, not limited to the subnet
connected LAN interface
6. Click On/Off to enable/disable the rule.
7. Click [+] to add this item to the 1:1 NAT List.
8. Click Apply.
NOTE: This module only works only when WAN port is in static mode!
Advanced
> Network > Routing.
63
for the directly
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SAX1V1K and is the answer not in the manual?
Questions and answers
Can the router be configured to add 2.4 Ghz output while retaining current 5 Ghz output?
Can router be configured for both 2.4 Ghz and 5Ghz Operation at same time?
Yes, the Askey SAX1V1K router supports dual-band wireless operation with both 2.4 GHz and 5 GHz frequencies, allowing for simultaneous operation on both bands.
This answer is automatically generated
can wifi be turned off?
Yes, the Wi-Fi can be turned off on the Askey SAX1V1K by selecting “No” in the "Enable Radio" setting.
This answer is automatically generated