Table of Contents
Advertisement
vulnerable to outside attacks. Please be aware of the security risks
involved in using DMZ.
Steps to set up DMZ:
1. From the navigation panel, go to Advanced > Network > WAN > DMZ.
2. Enable IPv4 DMZ: Check to enable or disable DMZ.
3. IP Address of Exposed Station: LAN IP address of a client who can provide
DMZ service. This makes the device with this IP address expose to Internet. Make
sure that the server client has a static IP address.
4. Enable IPv6 DMZ: Check to enable or disable IPv6 DMZ.
5. IPv6 Address of Exposed Station: The client's LAN IPv6 address that will provide
the DMZ service and be exposed on the Internet.
37
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SAX1V1K and is the answer not in the manual?
Questions and answers
Can the router be configured to add 2.4 Ghz output while retaining current 5 Ghz output?
Can router be configured for both 2.4 Ghz and 5Ghz Operation at same time?
Yes, the Askey SAX1V1K router supports dual-band wireless operation with both 2.4 GHz and 5 GHz frequencies, allowing for simultaneous operation on both bands.
This answer is automatically generated
can wifi be turned off?
Yes, the Wi-Fi can be turned off on the Askey SAX1V1K by selecting “No” in the "Enable Radio" setting.
This answer is automatically generated