Table of Contents
Advertisement
12. WMM APSD: Enable WMM APSD (WiFi Multimedia Automatic Power Save Delivery)
to improve power management between wireless devices. Select Disable to switch
off WMM APSD.
13. Turbo QAM: 256-QAM (MCS 8/9) support. Wireless Mode must be set to auto.
14. Universal Beamforming: For legacy wireless network adapters which do not
support beamforming, the WiFi Router estimates the channel and determines the
steering direction to improve the downlink speed. (Also known as Implicit
Beamforming.)
15. Multicast Enhancement Mode: The Multicast Enhancement Mode comes in
three modes. They are a) "Disable Multicast Enhancement", b) "Enable Multicast
Enhancement" (which uses Tunneling Mode), and c) "Translating Mode". But
"Enable Multicast Enhancement", which uses Tunneling Mode in the OL chip, is not
supported.
16. Disable Specific MCS Data Rates: Disabling specific MCS data rates per SSID.
17. Click Apply.
2.4.1.4 IPv6
The module is used to set some basic functions related to IPv6. For IPv6 service is not
yet widely available, contact your ISP to make sure whether IPv6 service is provided.
57
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SAX1V1K and is the answer not in the manual?
Questions and answers
Can the router be configured to add 2.4 Ghz output while retaining current 5 Ghz output?
Can router be configured for both 2.4 Ghz and 5Ghz Operation at same time?
Yes, the Askey SAX1V1K router supports dual-band wireless operation with both 2.4 GHz and 5 GHz frequencies, allowing for simultaneous operation on both bands.
This answer is automatically generated
can wifi be turned off?
Yes, the Wi-Fi can be turned off on the Askey SAX1V1K by selecting “No” in the "Enable Radio" setting.
This answer is automatically generated