Relay Label Definition - GE Multilin 369 Quick Start Manual

CHAPTER 1: INTRODUCTION
1.1.3

Relay Label Definition

369 MOTOR MANAGEMENT RELAY – QUICKSTART GUIDE
1
MODEL: 369-HI-R-B-F-P-0
SERIAL No: M53C07000001
FIRMWARE: 53CMC320.000
INPUT POWER:
POLLUTION DEGREE: 2 IP CODE: 50X
OVERVOLTAGE CATAGORY: II
7
1. The 369 order code at the time of leaving the factory.
2. The serial number of the 369.
3. The firmware installed at the factory. Note that this may no longer be the currently
installed firmware as it may have been upgraded in the field. The current firmware revi-
sion can be checked in the actual values section of the 369.
4. Specifications for the output relay contacts.
5. Certifications the 369 conforms with or has been approved to.
6. Factory installed options. These are based on the order code. Note that the 369 may
have had options upgraded in the field. The actual values section of the 369 can be
checked to verify this.
7. Control power ratings for the 369 as ordered. Based on the HI/LO rating from the order
code.
8. Pollution degree.
9. Overvoltage category.
10. IP code.
11. Modification number for any factory-ordered mods.
12. Insulative voltage rating.
2 3 4
MAXIMUM CONTACT RATING
250 VAC 8A RESISTIVE
1/4 HP 125 VAC 1/2 HP 250 VAC
12 RTDs:
BACKSPIN
FIBER OPTIC PORT
50-300 VDC
PROFIBUS
60-265 VAC
485mA MAX.
50/60Hz or DC
MOD:
INSULATIVE VOLTAGE: 2
8 9 10
ORDERING
5 6
U L
OPTIONS
NONE
11 12
840350AA.CDR
1–3