Long-Term Storage; 5.2.10 Approvals/Certification; 5.2.11 Type Test Standards - GE Multilin 369 Quick Start Manual

SPECIFICATIONS
5.2.9

Long-term storage

Note

5.2.10 Approvals/Certification

5.2.11 Type Test Standards

5–70
LONG-TERM STORAGE
Environment: ...................................................In addition to the above environmental considerations,
Correct storage: ..............................................Prevents premature component failures caused by
It is recommended that all relays be powered up once per year, for one hour
continuously, to avoid deterioration of electrolytic capacitors and subsequent relay
failure.
ISO: ........................................................................Designed and manufactured to an ISO9001 registered
UL:..........................................................................UL Listed (File E234799*)
CSA:.......................................................................Certified per: C22.2 No. 142 - Process Control Equipment
CE:..........................................................................Conforms to EN 55011/CISPR 11, EN50082-2, IEC 947-1,
* For MOD502 only
DeviceNet CONFORMANCE TESTED™
SURGE WITHSTAND CAPABILITY
ANSI/IEEE C37.90.1 Oscillatory (2.5 kV/1 MHz)
ANSI/IEEE C37.90.1 Fast Rise (5 kV/10 ns)
IEC / EN 61000-4-4, Level 4
INSULATION RESISTANCE
IEC / EN 60255-5
IMPULSE TEST
IEC / EN 60255-5
DIELECTRIC STRENGTH: ...............................ANSI/IEEE C37.90
CHAPTER 5: PRODUCT DESCRIPTION
the relay should be stored in an environment that is dry,
corrosive-free, and not in direct sunlight.
environmental factors such as moisture or corrosive
gases. Exposure to high humidity or corrosive
environments will prematurely degrade the electronic
components in any electronic device regardless of its use
or manufacturer, unless specific precautions, such as
those mentioned in the Environmental section above, are
taken.
process.
UL 508 - Industrial Control Equipment
UL 1053 - Ground Fault Protection Equipment
UL 1604* - Electrical Equipment for use in Class 1 Div 2
Hazardous Locations
C22.2 No. 213* - Non-incendive Electrical Equipment for
use in class 1 Div 2 Hazardous Locations
1010-1
IEC / EN 60255-5
CSA C22.2 No.14
369 MOTOR MANAGEMENT RELAY – QUICKSTART GUIDE