Special Equipment - Krautzberger HS-25 Operating Instructions Manual

If small quantities of a fluid are processed, the use of fluid or suction containers is recom-
mended. Suction containers should only be used with low-viscosity fluids. For suction opera-
tion, the air consumption of the hand held spray gun is higher since the fluid is conveyed
against the force of gravity.
The hand held spray gun HS-25 can, depending on the customer configuration, be fitted with the
HV1 or HV3 nozzle system. Both systems are HVLP systems (hvlp = high volume, low pressure)
for low-fog coating
The spray fluid is atomised using compressed air. The geometry of the spray jet and the sprayed
quantity of the spray fluid can be adjusted with the following measures:
n
Selection of the air and fluid nozzle
n
Changing the atomisation air pressure on the external regulator
n
Changing of the spray fluid pressure
n
Adjustment of the needle stroke on the regulator of the hand held spray gun
n
Adjustment of the flat jet regulator on the hand held spray gun.
3.3

Special equipment

Some special equipment and accessories are available for the hand held spray gun HS-25. See
Ä Chapter 7 „Spare parts/accessories" on page 23.
also
GB–8
Operating instructions
T-Dok-009-GB-Rev.0
mail@krautzberger.com, www.krautzberger.com