Removal And Replacement Procedures; Preparation For Disassembly; Rear Cover - HP E24d G4 Maintenance And Service Manual

Hide thumbs Also See for E24d G4:
Table of Contents

Advertisement

4

Removal and replacement procedures

Adherence to these procedures and precautions is essential for proper service.

Preparation for disassembly

Use this information to properly prepare to disassemble and reassemble the monitor.
1) Read the "Important safety information" and "Important service information and precautions" sections in
the "Getting started" chapter of this guide.
2) Clean the room for disassembly.
3) Identify the disassembly area.
4) Check the position that the monitors are to be placed along with the number of monitors. Prepare the area
for material flow according to the disassembly layout.
5) Be sure to have the following equipment and materials:
Press fixture
Working table
Screwdriver
Knife
Gloves
Cleaning cloth
ESD protection
Scraper bar in the following dimensions:

Rear Cover

Before removing the Rear Cover, follow these steps:
Prepare the monitor for disassembly. See Preparation for disassembly on page 13.
Remove the Rear Cover:
1) Remove four screw from Disassemble VESA screws.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E27d g4

Table of Contents