Removal And Replacement Procedures; Preparation For Disassembly; Rear Cover - HP OMEN 24 Maintenance And Service Manual

4

Removal and replacement procedures

Adherence to these procedures and precautions is essential for proper service.

Preparation for disassembly

Use this information to properly prepare to disassemble and reassemble the monitor.
1) Read the "Important safety information" and "Important service information and precautions" sections in
2) Clean the room for disassembly.
3) Identify the disassembly area.
4) Check the position that the monitors are to be placed along with the number of monitors. Prepare the area
5) Be sure to have the following equipment and materials:









Rear Cover

Before removing the Rear Cover, follow these steps:
▲
Prepare the monitor for disassembly. See Preparation for disassembly on page 10.
Remove the Rear Cover:
10
the "Getting started" chapter of this guide.
for material flow according to the disassembly layout.
Press fixture
Working table
Screwdriver
Knife
Gloves
Cleaning cloth
ESD protection
Scraper bar in the following dimensions: