Hdmi Connector Cn201; Rj45 Connector Cn901 - HP E24d G4 Maintenance And Service Manual

Remove DP connector
2) Lift the CN301/CN401 connector from the circuit board.
3) Place the new component on the circuit board. Be sure that it matches the footprint.
4) Solder the new component.

HDMI connector CN201

Repair the HDMI connector:
1) Use a hot air gun to melt the solder on the pins. Pin solder with soldering iron and absorber. You can gently
push down with the soldering iron once everything is molten to move the CN201 out of the through holes.
Remove HDMI connector
2) Lift the CN201 connector from the circuit board.
3) Place the new component on the circuit board. Be sure that it matches the footprint.
4) Solder the new component.

RJ45 connector CN901

Repair the RJ45 connector:
1) Use a hot air gun to melt the solder on the pins. Pin solder with soldering iron and absorber. You can gently
push down with the soldering iron once everything is molten to move the CN901 out of the through holes.
21