Tools Required; Installing The Cutter - Datamax H-Class Manual

Overview
This document describes the installation, use and care of the Cutter option for wide model H-Class
printers. After taking a moment to verify the contents of the kit and the tools required, follow the steps
below to install, use and maintain the Cutter option.
Contents
In addition to this procedure, the kit contains the following items:
Item Description

Cutter Assembly


Tools Required

To install this option, you will need a Phillips screwdriver.

Installing the Cutter

Always remove power before performing installation or maintenance.
CAUTION
1) Turn OFF the Power Switch and unplug
the power cord from the AC Receptacle.
Screw (2)
1
1
2
Power Switch
AC Receptacle