Additional Servicing; Lubrication Recommended Schedule - Jet HBS-1220DC Operating Instructions And Parts Manual

10.1.4 Additional grease/oil points
See Figures 11-4 and 11-5.

10.2 Additional servicing

Any additional servicing should be performed by
authorized service personnel.

10.3 Lubrication recommended schedule

Item or location
Vise lead screw
Hydraulic cylinder pivot
areas
Blade tension screw
Blade brush bearing
Gear box
Cutting fluid/coolant
Hydraulic oil
Grease fitting, front of
column (Figure 11-4)
Grease fitting, center of
driven wheel (Figure 11-4)
Grease fitting at gear
shaft (Figure 11-5)
Figure 11-4
Recommended lubricant
Light machine oil
Light machine oil
General purpose grease
Light machine oil
®
Mobil SHC Gear Oil 460, or
equivalent multi-purpose gear
oil
(May vary based upon
operating needs)
®
Mobil DTE Excel Series 32
(or equivalent ISO 32)
Mobil Mobilux® 1, or
equivalent.
Mobil Mobilux® 1, or
equivalent.
Mobil Mobilux® 1, or
equivalent.
Table 3
Frequency
Monthly
Every 6 months
Every 6 months
Monthly
Check periodically; top off as needed.
Change after first 50 hours of operation; then at least
once a year (more frequently if heavily used).
Check level and fluid quality periodically. For flush
and refill schedule, refer to cutting fluid/coolant
supplier's instructions.
Check periodically; top off as needed.
Change every 1 to 2 years or after 3000 operating
hours, whichever comes first.
Monthly
Monthly
Monthly
14
Figure 11-5