Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips #0 screwdriver
● Plastic scribe
Screw List
The following table shows the screw list and the image of the screws.
Table 1. Screw list
Component
Base cover
M.2 Solid-state drive bracket
M.2 Solid-state drive conversion bracket
M.2 Solid-state drive conversion plate
Hard disk-drive module
Hard disk-drive
WLAN card
WWAN card
System Fan
3-cell battery
4-cell battery
Screw type
Quantity
Captive screws
9
M2x3
1
M2x3
1
M2x3
2
M2X4.5
4
M3x3
4
M2x3
1
M2x3
1
M2x3
2
M2x3
3
M2x3
4
Removing and installing components
2
Image
11