Steps
1. Align and place the system fan into the slot on the palmrest assembly.
2. Install the two (M2x3) screws to secure the system fan to the palmrest assembly.
3. Connect the system fan cable to the connector on the system board.
Next steps
1. Install the
base
cover.
2. Exit the
service mode
3. Install the
SIM card tray
4. Install the microSD-card.
5. Follow the procedure in
Battery
Removing the 3-cell battery
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the
SIM card tray
4. Remove the
base
cover.
About this task
The following image indicates the location of the battery and provides a visual representation of the removal procedure.
42
Removing and installing components
for systems enabled with 4G LTE.
after working inside your
before working inside your
for 4G LTE enabled systems.
computer.
computer.