Dell Latitude 3520 Service Manual page 107

Table 8. System setup options—Storage menu (continued)
Storage
Storage interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
SATA-1
Type
Device
M.2 PCIe SSD-1
Type
Device
Enable Hard Drive Free Fall
Protection
Enable Hard Drive Free Fall Protection
Enable MediaCard
Table 9. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Touchscreen
EcoPower
Enable EcoPower
Full Screen Logo
Table 10. System setup options—Connection menu
Connection
Network Controller Configuration
This page allows you to enable the onboard drives.
By default, the SATA-1 option is enabled.
By default, the M.2 PCIe SSD-1 option is enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.
By default, the Enable SMART Reporting option is disabled.
Displays the SATA type information of the system.
Displays the SATA device information of the system.
Displays the M.2 PCIe SSD type information of the system.
Displays the M.2 PCIe SSD device information of the system.
Allows you to enable Hard Drive Free Fall Protection feature.
By default, the Enable Hard Drive Free Fall Protection option is selected.
Enable or disable the media card in read-only state.
By default, the Secure Digital (SD) Card option is enabled.
Enable to set screen brightness when the system is running on
battery power.
Enable to set screen brightness when the system is running on
AC power.
Enable or disable touchscreen for the operating system.
Touchscreen will always work in the BIOS setup irrespective
of this setting. This option is enabled by default.
Enable or disabled EcoPower feature. This option is enabled by
default.
Enable or disable full screen logo.
By default, the option is disabled.
BIOS setup 107