Installing The Battery Cable; Memory Module; Removing The Memory Module - Dell Latitude 3520 Service Manual

Installing the battery cable

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the battery cable and provides a visual representation of the installation procedure.
Steps
1. Connect the battery cable to the connector on the battery.
2. Slide the metal above the connector on the battery to lock.
3. Route the battery cable through the routing channel in the battery and adhere the adhesive tapes.
4. Connect the battery cable to the connector on the system board.
Next steps
1. Install the base cover.
2. Install the SIM card tray
3. Install the microSD-card.
4. Follow the procedure in

Memory module

Removing the memory module

Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the SIM card tray
22 Removing and installing components
for 4G LTE enabled systems.
after working inside your
before working inside your
for 4G LTE enabled systems.
computer.
computer.