Dell Latitude 3520 Service Manual page 106

Table 6. System setup options—Boot Configuration menu (continued)
Boot Configuration
Secure Boot
Enable Secure Boot
Secure Boot Mode
Expert Key Management
Enable Custom Mode
Custom Mode Key Management
Table 7. System setup options—Integrated Devices menu
Integrated Devices
Date/Time
Camera
Audio
Enable Audio
USB Configuration
Disable USB4 PCIE Tunneling
Video/Power only on Type-C Ports
Miscellaneous Devices
Enable Fingerprint Reader Device (For
systems with discrete video card only)
Table 8. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
106 BIOS setup
By default, the Secure Digital (SD) Card Boot option is not enabled.
Enable or disable the secure boot feature.
By default, the option is disabled.
Allows you to modify the secure boot mode options.
By default, the Deployed Mode is enabled.
By default, the Audit Mode is disabled.
Enable or disable custom mode.
By default, the custom mode option is not enabled.
Allows you to select the custom values for expert key management.
Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Enables or disable the camera.
By default, the Enable Camera option is selected
Enable or disable the integrated audio controller.
By default, the Enable Audio option is enabled.
By default, the Enable Microphone option is enabled.
By default, the Enable Internal Speaker option is enabled.
● Enable or disable booting from USB mass storage devices that are
connected to external USB ports.
By default, the Enable External USB Ports option is enabled.
● Enable or disable booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
By default, the Enable USB Boot Support option is enabled.
Disable the USB4 PCIE Tunneling option. By default, this option is disabled.
Enable or disable the Type-C port functionality to video or only power. By
default, the Video/Power only on Type-C Ports option is disabled.
Enables Fingerprint Reader Device. This option is enabled by default.
Set the operating mode of the integrated storage device controller.
By default, the RAID On option is enabled.