Product-Specific Part; Sigma 1; Performance Data - Sigma 1 - ProMinent 10022 Supplementary Operating Instructions

1

Product-specific part

1.1 Sigma 1

1.1.1 Performance data – Sigma 1
S1Ba with hygienic pump head at 50 Hz
operation
Type Minimum pump capacity at maximum
back pressure
bar
10022 10
10044 10
07065 7
S1Ba with hygienic pump head at 60 Hz
operation
Type Minimum pump capacity at maximum back pressure
bar
10022 10
10044 10
07042 7
S1Cb with hygienic pump head
Type Minimum pump capacity at maximum
back pressure
bar
10022 10
10044 10
07065 7
Should the information in these supplementary operating instructions and
the operating instructions for the pump contradict each other, the informa‐
tion in these supplementary operating instructions will take precedence!
l/h ml/stroke
24 5.5
46 5.3
68 5.5
psi l/h gph
145 29 7.6
145 55 21.4
102 81.1 21.4
l/h ml/stroke
30 4.7
54 4.5
66 4.7
All figures are guideline figures for water at 20 °C.
The priming lift applies to clean, moist valves, an empty suction line and
empty liquid end - with correct installation.
Maximum Priming lift
stroke rate
Strokes/min mbar
73 200
143 200
205 200
Maximum Priming
stroke lift
rate
ml/stroke Strokes/m mbar
in
4.7 88 200
4.5 172 200
8.7 88 200
Maximum Priming lift
stroke rate
Strokes/min mbar
88 200
172 200
200 200
Product-specific part
Suction lift Connector
size
mbar DN
500 10
500 10
500 10
Suction Con‐
lift nector
size
mbar DN
500 10
500 10
500 15
Suction lift Connector
size
mbar DN
500 10
500 10
500 10
3