Table of Contents
Advertisement
Available languages
Available languages
6. IR Remote Control
Connect the IR IN port to an IR receiver, the switcher can be controlled by the below IR
7. IR remote control
remote.
Connect the supplied IR receiver to IN port
control.
INPUTS
Manual
Auto
SOURCE
VGA RESOLUTION
1280x720 1360x768 1920x1080 1920x1200
DISPLAY
HDMI 2.0 Presentation Swither
Note:
• The source and display devices must support CEC in order to control them with the IR remote control.
• CEC is available via HDMI, only.
24
10
① Enter or exit standby mode.
② Video input selection buttons (1~4) and AUTO
1
ON/OFF: To active or deactivate stand-by mode
1
③ Source device control buttons.
INPUTS: 1-4: Select the appropriate input source
2
2
3
MANUAL/AUTO: Activate/Deactivate AUTO mode
SOURCE: Control the input source (e. g. DVD player)
4
OK
3
④ VGA resolution selection buttons.
4
VGA RESOLUTION: To select the VGA output resolution.
5
⑤ Display device control buttons.
5
DISPLAY: Display control (e. g. TV)
6
to controll the switcher by the below infrared remote
mode button.
Page Up
Rewind
Pause/Play
Exit
Up
Left
Power On/Off
Power On/Off
Volume Down
8
Page Down
Fast Forward
Stop
Enter
Down
Right
Mute/Unmute
Volume Up
Advertisement
Chapters
Table of Contents
