System Connection; Button Control; Manual Switching; Automatic Switching - Kindermann MultiSwitch 41 4K60 Mounting And Operating Instructions

⑫ DC 12V: DC barrel port for power adapter connection.

4. System Connection

5. Connection diagram
The following diagram illustrates typical input and output connections that can be
The following diagram illustrates typical input and output connections which can be used with this
switcher: utilized with this switcher:

6. Button control

6.1 Manual switching

The MultiSwitch 41 4K60 is in manual switching mode when the auto mode LED is off . To change the
input source, please press button 1, 2, 3 or 4, the corresponding LED illuminates green.
6.2 Auto switching
Press and hold the AUTO button for at least three seconds to activate or deactivate automatic switching
mode. The LED will illuminate green. MultiSwitch 41 4K60 will react according to the following rules:
• It will switch to the fi rst available active input starting at input 1 to 4.
• New input: The switcher will automatically select the new input once detected.
• Reboot: If power is lost, it will automatically choose the last active input.
• Remove Source: If an active source is removed, the switcher will switch to the fi rst available active
input starting at HDMI input 1.
• Pressing one of the 4 video source buttons
If there's no active signal MultiSwitch 41 4K60 will switch to the fi rst available active input starting
at HDMI input 1.
22
5
2 will directly switch to the selected input source.