Edid Management; Audio Control - Kindermann MultiSwitch 41 4K60 Mounting And Operating Instructions

8.4 EDID management

It's possible to store up to four individueal EDID values. Please follow the description below and use
the commands to upload them.
Note:
Please don't forget to set DIP switches to „1111" in order to control them via RS232.
Please check chapter 6.3 for further information.
Command
EDIDW[xxxx].
Command
EDIDRxxxx.
EDIDUSExxxx.

8.5 Audio control

Command
AUDIOON.
AUDIOOFF.
SPDIFON.
SPDIFOFF.
IISON.
IISOFF.
Function & Operation
User-defined EDID. [xxxx] = 1011, 1100, 1101 or 1110.
Operation:
Step 1: Prepare the EDID file (.bin).
Step 2: Set the 4-pin DIP switch to "1111" status.
Step 3: Send the command "EDIDW1101.",
and the feedback is "PLEASE SEND THE EDID FILE!".
Step 4: Send the EDID file (.bin). If successfully upload, the feedback is:
"RECEIVED THE FILE, LENGTH=134!
EDID1101 UPDATE SUCCESSFULLY!"
Function
Read the preset EDID. The "xxxx"
represents the 4-pin DIP switch status.
It maybe from "0000" to "1110".
Activate preset EDID function. The "xxxx"
represents the 4-pin DIP switch status.
Function
Enable AUDIO Output
Disable AUDIO Output
Turn on the OPTICAL audio output.
Turn off the OPTICAL audio output.
Turn on the analog balanced L/R audio output.
Turn off the analog balanced L/R audio output.
Command feedback
EDIDR0000.
EDID HEX STRING OF '0000':
EDIDUSE0000.
DIP0000!
Command feedback
AUDIO OUT ON!
AUDIO OUT OFF!
SPDIF OUT ON!
SPDIF OUT OFF!
IIS OUT ON!
IIS OUT OFF!
27