Rückseite - Kindermann MultiSwitch 41 4K60 Mounting And Operating Instructions

4.2 Rückseite HDMI V2.0 4x1 Presentation Switcher with Audio Extraction
3.2 Rear Panel
1. HDMI IN 2. USB-C IN
1 1 2 2
① 1. HDMI IN: Connects to HDMI video source.
HDMI IN:
1
② 2. USB-C IN: Connects to the video source with SlimPort output, e.g. Macbook.
USB-C IN:
2
③ 3. DP IN: Connects to DisplayPort video source.
④ 4. VGA IN: Connects to VGA video source.
DP IN:
3
⑤ VGA Audio IN: Connects to audio source to be embedded in VGA video.
VGA IN:
4
⑥ HDMI OUT: Connects to HDMI display device.
VGA Audio IN: Analoger Stereo Audio Eingang - dem VGA Eingang zugeordnet
5
⑦ OPTICAL: Connects to audio playback device.
HDMI OUT:
6
⑧ L/R (5-pin balanced audio): Connects to audio playback device.
OPTICAL:
7
⑨ EDID: 4-pin DIP switch for EDID setting.
L/R:
8
⑩ IR IN: Connects to IR receiver to control the switcher by IR remote.
9 EDID:
⑪ RS232: Connects to RS232 control device (e.g. PC) to control the switcher by
IR IN:
10
RS232 commands.
⑫ DC 12V: DC barrel port for power adapter connection. RS232:
11
DC 12V:
12
4. System Connection
The following diagram illustrates typical input and output connections that can be
utilized with this switcher:
6
3. DP IN 4. VGA IN
3 3 4 4
HDMI Eingang (Typ A)
USB-C Eingang für den Anschluss von Geräten, die einen HDMI Alt Mode
kompatiblen USB-C Ausgang haben
DisplayPort Eingang
Analoger VGA Eingang
HDMI Ausgang (Typ A)
Digitaler Audio Ausgang (Toslink)
Analoger, symmetrischer Audio Ausgang
DIP Schalter für das EDID Management
3,5 mm Klinke Buchse, zum Anschluss des Infrarotempfängers
Steuerschnittelle
Netzanschluss
HDMI OUT OPTICAL L
5 5 6 6 7 8 8
7
5
Tx Rx
ON 1
OFF 0
1 2 3 4
R EDID IR IN RS232
9 9 10 11 12