System Connection; Button Control; Manual Switching; Auto Switching - Kindermann 5778 000 150 Mounting And Operating Instructions

4.2 System Diagram
The following diagrams illustrate typical input and output connections that can be

5. System connection

utilized with this switcher:
The following diagrams illustrate typical input and output connections which can be used with this
switcher:
The switcher is used alone:
PC 1
SOURCE 1
SOURCE 1
Laptop Blu-Ray
Laptop
Laptop

6. Button control

6.1. Manual switching

Press button 1 - 4
4

6.2. Auto switching

5
Press AUTO to activate or deactivate auto switch mode. The LED will illuminate blue when in
auto mode.
The HDMI Switch 41 4K60 KVM will react according to the following rules:
• It will automatically switch to the fi rst available active input starting at input 1 to 4.
• Pressing one of the source buttons
• New Input: The switcher will automatically select the new input once detected.
• Reboot: If power is lost, it will automatically choose the last active input once powered again.
If the source isn't available anymore the switcher will select the fi rst available input starting at input 1.
• Source Removed: When the active source is removed, the switcher will select the fi rst available input
starting at input 1.
Note: To detect the input signal the switcher checks for 5V (default) or TMDS signals on the HDMI inputs.
20
PC 2 PC 3 PC 4
PC 1 PC 2 PC 3
SOURCE 2 SOURCE 3 SOURCE 4
SOURCE 2 SOURCE 3
MacBook
PC PC MacBook
Blu-Ray
MacBook
to select the corresponding video and/or USB source.
4
SM OB SM OB
1 2 3
DEVICES GR1 GR2
SM
SM OB SM OB
1 2 3
PC 4 DEVICES GR1
DISPLAY AUDIO OUT GR3 GR4 SM
SOURCE 4 DISPLAY AUDIO OUT GR3
Projector
Display
Projector
5
5
will directly change the input source.
USB:
HDMI:
Audio:
Control:
Tx Rx
RS232
OB SM OB Tx Rx
GR2 RS232
OB DC 12V SM OB
GR4 DC 12V
Keyboard
Speaker
Speaker
Speaker
USB:
HDMI:
Audio:
Control:
CommuniKam
Mouse
Keyboard Keyboard Mouse Mouse