Navigation And Status Bar; Material Details; Creating Labels - Brady Wraptor A6200 User Manual

Navigation and Status Bar

The printer and supply status icons in the status bar at the bottom of the home screen provide the
following information.
Icon
blinking

Material Details

To see detailed information about the label supply and ribbon, click the supply or ribbon part number in
the status bar. The Material Details screen opens.
To close the Material Details screen, click the x in the upper right corner.

Creating Labels

Create label files using Brady Workstation software. When you first create a label file, you specify the
printer. This allows the software to provide features specific to your printer. Also, the software
automatically detects the labels installed in the printer. See "Software for Creating Labels" on page 11.
For help using the software, refer to the documentation within the software.
Wraptor A6200 User Manual
Tap the home button at any time to return to the home screen.
While navigating the menus, tap the back button to go back to the previous screen.
The text beside this icon indicates the label material installed in the
printer.
The printer cannot read the memory cell on the label supply. Label
supply may not be installed, may be installed incorrectly, or the
memory cell may be corrupted.
The printer is ready to print and wrap a label. This icon is only
visible when the Printing (run) screen is displayed and a print job is
loaded.
Printing is paused. To resume printing, return to the home screen
and tap Run.
The printer is receiving data from a computer connected with a
USB cable or from the network.
Meaning
General Operation
Creating Labels
26