Running Jobs - Brady Wraptor A6200 User Manual

Running Jobs

Tap Run on the home screen to begin printing and wrapping the first job in the print
queue. The touch screen displays the first label in the first job as well as controls for
moving between labels, a mode indicator, and a counter of labels printed and
wrapped.
To print the label and wrap a wire: Insert the wire into the printer jaws. The printer prints the label
and wraps it on the wire. The display advances automatically to the next label. For more detail see
"Printing: Quick Start" on page 27.
The following table describes the controls and information on the touch screen when running a print
job.
Button
Wraptor A6200 User Manual
CAUTION! If the wrong label material for the file is in the printer, a message is
displayed. Use caution when overriding this warning message. The
label size loaded in the printer may not be appropriate for the print
file and will generate scrap.
Goes to the next label. (Not available if the print file contains only one label.)
Goes to the previous label. (Not available if the print file contains only one label.)
Goes to the last label in the file. (Not available if the print file contains only one
label.)
Goes to the first label in the file. (Not available if the print file contains only one
label.)
Description
General Operation
Printing: Details
33