Installation On A Roofcurb; Adjustable / Non-Adjustable Roofcurb - Lennox eNeRGy Series Installation, Operating And Maintenance

INSTALLATION ON A ROOFCURB

Adjustable / Non-adjustable roofcurb

Example of non-adjustable roofcurb without condensing unit
Example of non-adjustable roofcurb with condensing unit
The contact to the ground must be realized with the entire contact area of the roofcurb (no discontinuous
CAUTION
• Installation of the unit and accessibility must be compliant with the local regulations. Ensure that all access equipment allow
maintenance operation in safety (electrical cabinet, main switch, panels, filter, refrigerant circuit...)
This recommendation is valid for installations in general and in particular for return and curbs.
• It's advised to fix curbs and roofcurbs to the unit.
eNeRGy-IOM-2020.11-EN
WARNING : all the roofcurb must be strongly secured to the ground
Example of adjustable roofcurb without condensing
Example of adjustable roofcurb with condensing unit
contact).
unit
• •
23