Lennox eNeRGy Series Installation, Operating And Maintenance page 9

INTRODUCTION
Labels
The rooftop may be marked with the following warning labels to alert to potential hazards (on or near the potentially hazardous part).
The rooftop may include the following labels
High temperatures Electrical Voltage Rotating parts Sharp parts
Wear of PPE (Personal
Warning
A2L: slightly flammable
Don't walk
Inflammable dusty filters
protective equipment)
Warning main switch
Don't strap EUROVENT certification Gravity center
supplied from bottom
Protection by water filter Protection by strainer filter Transport of non-flammable Transport of flammable
mandatory mandatory liquefied gas liquefied gas
Electrical connections can loosen during transport.
OK to send document Information to read
Please check them before start-up.
CA marking (UK) EAC Marking (Russia)
CMIM marking (Morocco) CE marking
Regularly check that the warning labels are still in the correct positions on the machine and replace them if necessary.
• •
eNeRGy-IOM-2020.11-EN 9