Microlife NC200 Manual page 2

Microlife NC 200
2
1 5
4
6
7
3
8
9 AQ
AT AR
AK AS
AL BT
AM BK
AN BL
AO BM
AP BN
Microlife Non Contact Thermometer NC 200
1 Measuring sensor
2 Tracking light
3 Self-indicator light
4 Display
5 M-button (memory)
6 MODE button
7 START/IO button
8 Battery compartment cover
9 All segments displayed
AT Ready for measuring
AK Measurement complete
AL Body mode
BO
AM Object mode
AN Low battery indicator
AO Changing between Celsius and Fahrenheit
BP
AP Recall mode
AQ Recall the last 30 readings
AR Measured temperature too high
BQ
AS Measured temperature too low
BT Ambient temperature too high
BK Ambient temperature too low
BL Error function display
BM Blank display
BN Flat battery
BO Date/Time
BR
BP Beeper function setting
BQ Replacing the battery
BS BR Measuring countdown
BS Protective cap
Read the instructions for use
Type BF applied part
2
EN
Batteries and electronic devices must be disposed of in
accordance with the locally applicable regulations, not with
domestic waste.
Keep dry
Temperature limitation
SN N Serial number
Catalogue number
Manufacturer
Date of manufacture
A mark of compliance with technical regulations
CE Marking of Conformity
This Microlife thermometer is a high quality product incorporating
the latest technology and tested in accordance with international
standards. With its unique technology, this device can provide a
stable, heat-interference-free reading with each measurement.
The device performs a self-test every time it is switched on to
always guarantee the specified accuracy of any measurement.
This Microlife thermometer is intended for the periodic measure-
ment and monitoring of human body temperature.
This thermometer has been clinically tested and proven to be
safe and accurate when used in accordance to the operating
instruction manual.
Please read through these instructions carefully in order for you to
understand all functions and safety information.