–
USB2 PHY Sus Well Power Gating
Select 'Enabled' to enable SUS Well PG for USB2 PHY. This option has no
effect on PCH-H.
–
USB Overcurrent
Select 'Disabled' for pin-based debug. If pin-based debug is enabled but USB
overcurrent is not disabled, USB DbC will not work.
–
USB Overcurrent Lock
Select 'Enabled' if Overcurrent functionality is used. Enabling this will make
xHCI controller consume the Overcurrent mapping data
–
USB Port Disable Override
Selectively Enable/Disable the corresponding USB port from reporting a
Device Connection to the controller.
–
USB Port Power
Enable/Disable USB ports power in S4/S5.
Security Configuration
77
ARK-3532 User Manual