D e t e c t i o n D e t e c t i o n Contents Contents Warnings and avertisseement Disposal 1. About the PDM Mono Dock 2. Component Descriptions Button Functions Led indication Error Codes 3. Operating the PDM Mono Dock...
Read and understand this manual before use DISPOSAL The PDM Mono Dock Should not be disposed with your household waste. The PDM Mono Dock is ide- ally suited for disposal within the waste electronic and electrical equipment (WEEE) recycling scheme.
The PDM Mono Dock is designed as stand-alone portable Bump/Calibration station for use with the PDM. Easy use with only 2 buttons to operated, transportable in a rugged case. Bump, Calibration and event logs are safely stored on a SD card.
D e t e c t i o n 3. Operating the PDM Mono Dock Powering the PDM Mono Dock The PDM Mono Dock can be powered by 6X 1.5V AA alkaline batteries or by applying a 12V dc external power supply. Tuning on the PDM Mono Dock Turn on the PDM Mono Dock by pressing either the Calibration or Bump button.
A config example is include on the last page of the manual. 6. SD Logs Every test is saved onto the SD Card, PDM Mono Dock log files are saved in a Comma Separated CSV file witch can be parsed by a spreadsheet program.
Load valid configuration onto the SD Card Make sure there are no obstructions in the hoses and filters Pump Blocked error of the detector and , PDM Mono Dock. Verify that the gas- bottle is not empty or connected improperly Mono Dock Defect error...
9. Config example See example below as config.ini in the folder config on the root of the sd card. ; Example configuration file for Watchgas PDM docking station ; Replace values @ co,h2s,o2,h3,so2 if a different bottle is used ; Update lot= and experiation= when replacing the gas bottle ;...
D e t e c t i o n 10. Limited Warranty WatchGas warrants this product to be free of defects in workmanship and materials-under normal use and service for two years from the date of purchase from the manufacturer or from the product’s authorized reseller.