General Settings; Set Up Your Multiboard; Input Settings - Prestigio MultiBoard PMB554S558 Quick Start Manual

6. General settings

Set up your MultiBoard

Follow the steps to finish settings:
1� Plug the POWER cord and switch on the power�
2� Press INPUT on the remote control to enter settings�
3� Press or to select the settings item�
4� Press ENTER if you want to set the desired item�
5� Select the parameter by pressing
6� Press ENTER to confirm your selection�
7� Press INPUT again to go back to preview mode�

Input settings

1� Press INPUT button on the remote control enter input settings menu�
2� Press / /
3� Press the Enter button on the remote control to confirm selected input source�
4� Press the return key on the remote control to exit�
NOTE! Here the Prestigio MultiBoard G-series Android UI is used for illustrations.
For S and L-series Andorid UIs please visit product support section on www.prestigio.com.
EN - 18
PMB718G988 848,PMB554G558 658 708_QSG Book.indb 20
or
/ button on the remote control to select the input source you need�
�
Quick Start Guide
Prestigio MultiBoard
6
2015/1/30 11:35:41