Important Note - Prestigio P179 Manual

Q4. Stripe or interference occurs on screen of CATV channel.
1. Check if screens of other CATV channels are normal.
2. If the other channels are normal, please select OSD "CH FINE TUNE" and fine tune display using <+> or <-> selec-
tion.
3. If the above actions still cannot resolve the problem, please contact your dealer or store where you
Q5. One of the Audio / Video input does not give screen display...
1. Check if the s-video cable or composite cable is connected.
2. Check if the display mode of your monitor is set to the right AV input signals.
3. If the above actions still cannot resolve the problem, please contact your dealer or store where you purchased the
product.
Q6. There's no stereo or MTS sound effects...
1. Check if the program you're watching is broadcasted with stereo or MTS signal.
2. Check if stereo/MTS sound effect is correctly set.
3. If the above actions still cannot resolve the problem, please contact your dealer or store where you purchased the
product.
Q7.There's no screen, but sound on TV mode...
1. Check if the channel you're watching is the only channel without screen.
2. Make sure if other channels also have no screen...
3. If the above actions still cannot resolve the problem, please contact your dealer or store where you purchased the
product.
Q8. The TV displays monochrome only or over-saturated color
1. Check if "SATURATION" and "TINT" of the "ADJUST" selection are adjusted to maximum or minimum by mistake.
2. Check if other channels are monochrome...
3. If the above actions still cannot resolve the problem, please contact your dealer or store where you purchased the
product.

Important Note:

Press the "Source" button on the Remote Control will cause not display in TV/CVBS/S-Video
mode, users must Press the "+" keypad on the front of Panel to select TV/CVBS/Video mode
again for display again.
PRESTIGIO P179 21