Table of Contents
Advertisement
Installing the System Memory
The motherboard supports 16 memory slots for DDR4 registered DIMM.
Total Slots
Number of Channels
Supported DIMM Capacity
Memory Size
Memory Type
Minimum DIMM Installed
Memory Module Installation Instructions
Please follow the steps below to install the DIMM memory modules.
1. Power off the system.
2. Pull open the DIMM slot latches.
3. Align the notch of the module with the socket key in the slot and carefully insert the card into the slot.
4. Push the module down into the slot until it is firmly seated. Press vertically on both corners of the card
until it clicks into place.
Click
4 (4 slots per processor)
4 (Channel 0~1, 2 DIMM per channel) per processor
4GB, 8GB, 16GB, 32GB
Maximum 128 GB RDIMM (32GB*4)
DDR4 2666 MHz ECC/U/R DIMM
Each processor requires at least 2 memory modules to boot and run
from.
Notch
Socket Key
36
Click
Advertisement
Table of Contents
