Fig. 14. Grease piston packings and sleeve top edge.
Fig. 14
Fig. 15. Carefully slide piston assembly into top of
sleeve.
Fig. 15
Service
Fig. 16. Grease top inch or two of piston rod that will
go through the cylinder throat packings.
Fig. 16
Fig. 17. Grease o-ring (221) and place on sleeve. Slide
sleeve/piston rod assembly into bottom of cylinder. Re-
place o-ring (207) if desired.
Note: O-ring (207) is not required for safe pump opera-
tion.
7578A
221
7577A
Fig. 17
7579A
207
7582A
309277
7