Viking E-10-IP Product Manual page 6

B . E-32-IP / E-32-IP-EWP
The E-32-IP is designed to be flush mounted to a standard double gang electrical box (minimum dimensions of: 3.65"W x 2.84"H x
2.25"D). * CAUTION: Excessive wire length and/or using a rough-in box with inadequate depth can apply force to the circuit board
causing physical damage.
Dimensions: Overall: 5" x 5" x 2.25" (127mm x 127mm x 57mm)
E-32-IP Faceplate: 14 gauge 316 stainless steel with #4 brushed finish
Shipping Weight: 2.12 lbs (1.0 kg)
Blue LED: Call connected LED lights steady to help locate the button in low light, flashes during dialing, then lights steady when
answered.
Note: When mounting outside to rough or uneven surfaces (brick, stucco, etc.) apply a bead of clear silicone caulking around
the top edge and sides of faceplate.
Note: When European CE compliance is required, mount as shown in a metal enclosure.
Note: For surface mount installations, use Model E-30-IP / E-30-IP-EWP with VE-5x5 surface mount box.
"Old Work" Double
Gang Rough-In Box*
(Example: Allied Molded 9312
box shown below, not included)
*
2.25"
Deep
Min.
(4) Optional
Dry Wall
Screws
(not included)
C. E-20-IP / E-20-IP-EWP
The E-20-IP and E-20-IP-EWP are designed to be surface mounted to a single gang box (not included), a standard 4"
x 4" electrical junction box (not included), or directly to a wall or flat sided post. Caution: For rough surfaces (ie: brick,
stucco, etc.) additional caulking may be required.
Shipping Weight: 1.5 lbs (0.75 kg)
4.50" 3.40"
2.35"
3.65"
Wide
Min.
2.84"
Tall Min.
Earth
Earth Ground
Ground
the Green/Yellow
wire using the
provided wire nut
5.50"
3.40"
1.55"
3.30"
Mount back panel to a wall, a single
gang box or a 4"x4" junction box with
the arrow pointing up. Note: For
1.70" Deep
outdoor applications apply a bead of
caulk between back panel and wall.
Peel paper liner and adhere gasket
to back of panel, centering over
mounting holes. Caution: For rough
surfaces (ie: brick, stucco, etc.)
additional caulking may be required.
Back Panel of the
E-20-IP/E-20-IP-EWP
UP
6
(4) T-10 Torx stainless
steel, flat head, security
screws and drive bit
(included)
Call Connected Blue LED
Marine grade 316
stainless steel faceplate
and push button switches
(sealed per IP67)
"Help" Push to Call Button
Laser Etched Graphics
Side view of the
E-20-IP/E-20-IP-EWP
Attach the cover to the
base with the two included
screws as shown.