Features Overview - Viking E-10-IP Product Manual

Green Unit Status LED
Yellow Network Status LED:
Lights steady to indicate power
and data link. Blinks to indicate
network activity.
Connect to Optional
Doorstrike, Mag Lock,
Gate Controller, etc.
120V AC
(not
connected)
Doorstrike /
Magnetic Lock
(Power typically not
required for gate controllers)
Note: The gel-filled (water-tight) butt connectors are designed for insulation displacement on 19-26 gauge wire with a
maximum insulation of 0.082 inches. Cut off stripped wire ends before terminating.
* Note: The front panel of the E-10-IP/E-30-IP/E-32-IP is mounted using security Torx screws to help prevent intruders
from removing the panel and accessing the on board door strike/gate control relays. For applications requiring additional
security, a Viking model RC-4A remote relay controller can be used. The relay controller is mounted securely inside the
building and connected to the same LAN as the E-10-IP/E-30-IP/E-32-IP. For more information on the RC-4A Secure Relay
Controller, see DOD 582.

Features Overview

Rear (PCB) View of E-10/20/30/32-IP Entry Phone
* On-Board 2 Amp
Relay Output Contacts
(2A@30VDC/ 250VAC max)
N.C. (Gray)
COM. (Blue)
N.O. (Yellow)
3 Gel-Filled Butt
Connectors (included)
Black
Black
Green
Green
Yellow
Yellow
- Black
+ Red
4
PoE LAN Port 10/100, PoE
Class 1 (<4 Watts): Connect
to your LAN via RJ45 plug
and CAT5 or greater twisted
pair wire.
MAC Address Label: The
MAC address is aunique 12
digit number used by routers
to send network traffic to the
correct IP address.
Call Switch
Request for Exit (
REX Input
Speaker
Microphone
)