Table of Contents
Advertisement
Quick Links
TECHNICAL
TECHNICAL
T
T
E
L
E
E
L
E
Brushed 316 Stainless Steel
to Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipita-
tion or condensation. EWP products feature foam rubber gaskets and boots, silicon sealed connections,
gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally
sealed, field-adjustable trim pots and DIP switches for easy on-site programming.
F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
• Vandal Resistant Features: 14 gauge louvered 316 stainless
steel faceplate with permanent laser etched graphics, speaker/
mic screen, heavy duty metal keypad and "CALL" button and
hex drive mounting screws
• Weather Resistant Features: Marine grade 316 stainless
steel faceplate, screws and and push button switch. Switch
internally sealed per IP67. Mylar speaker. Self-draining mic
mount. Faceplate, mic and speaker gaskets. Weather resistant
powder paint on optional VE-5x5 (DOD# 424).
• E-30-PT-EWP is designed to meet IP66 Ingress Protection
Rating (see DOD# 859 for more information)
• Push to talk button
• Telephone line powered
2
• Non-volatile E
memory (no batteries required)
• Programmable to dial up to 5 numbers on busy or ring no
answer
• Red off-hook LED indicator
• Volume adjustments for microphone and speaker
• Advanced call progress detection: disconnects on busy
signal, return to dial tone, CPC, reorder tone, maximum call
time out and programmable silence time out
• Selectable auto-answer feature for monitoring
• Selectable push button disconnect
• Extended temperature range (-15°F to 130°F)
• Flush mountable using included plastic rough-in box
• Optional VE-5x5 surface mount back box (DOD# 424)
P
h
o
n
e
.
.
.
7
1
5
.
3
8
6
P
h
o
n
e
.
.
.
7
1
5
.
3
8
6
w
w
w
.
v
i
k
i
n
g
e
l
e
c
t
w
w
w
.
v
i
k
i
n
g
e
l
e
c
t
S
S
C
O
M
O
L
U
T
I
O
N
S
C
O
M
O
L
U
T
I
O
N
S
Provide Reliable and Intelligent
Communication - In Noisier Locations
E-30-PT/E-30-PT-EWP
(shown in optional VE-5x5)
.
8
8
6
1
.
8
8
6
1
r
o
n
i
c
s
.
c
o
m
r
o
n
i
c
s
.
c
o
m
P
r
a
c
P
r
a
c
2
1
C
2
1
C
F
O
R
T
H
E
S
T
F
O
R
T
H
E
S
T
The E-30-PT is designed to provide quick and reliable communication
in noisier areas. The mic sensitivity is set to a low level until the TALK
button is pressed then it is raised to a normal level. In this way, the E-
30-PT assures that the called party's voice will be broadcast over the
speaker. In applications where the background noise can be loud-
er than the person calling, a handset type phone is recommended.
The E-30-PT features non-volatile memory, a built in dialer, and intelli-
gent call progress detection for automatic hang-up when the call is
completed. The E-30-PT can be programmed to dial up to 5 different
numbers on ring no answer or busy and can be configured to dial these
numbers until answered.
The E-30-PT-EWP shares all of the features of the E-30-PT in addition
A
p
p
l
A
p
p
l
Non-ADA Hot-Line Phones for:
• Terminals
• Parking lots/ramps
• ATM machines
Gate and Door Entry Phones for:
• Business lobbies
• Vehicular and pedestrian gates
• Residences
CAUTION - When installing on an analog extension of a phone system:
Some phone systems do not conform to analog telecom standards and might
not be compatible with the E-30-PT phones. For a detailed description of the
telephone line specifications required for any of the E-30-PT phones, see
DOD# 869.
S
p
e
c
S
p
e
c
Power: Telephone line powered. Minimum 24V DC talk battery
voltage, with a minimum loop current of 20mA loop (room temp),
or 25mA (extended cold temp range). Loop current may be
boosted on low current lines with a Viking Model TBB-1B talk
battery booster (DOD# 632).
Minimum Ring Voltage: 90VAC RMS
Dimensions: Overall-127mm x 127mm x 57mm (5" x 5" x 2.25"),
Plastic Electrical Box-102mm x 102mm x 54mm (4" x 4" x 2.12")
Shipping Weight: 1 Kg (2.2 lbs)
Operating Temperature: -26°C to 54°C (-15°F to 130°F)
Humidity - E-30-PT: 5% to 95% non-condensing
Humidity - E-30-PT-EWP: Up to 100% condensing
Connections - E-30-PT: RJ11 jack
Connections - E-30-PT-EWP: Gel-filled butt connectors
E-30-PT /
E-30-PT /
E-30-PT-EWP
E-30-PT-EWP
Speaker Phone with
t
i
c
e
t
i
c
e
Push To Talk Button
E
N
T
U
R
Y
August 20, 2012
E
N
T
U
R
Y
i
c
a
t
i
o
n
s
i
c
a
t
i
o
n
s
• Stadiums
• Convention centers
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
Advertisement
Table of Contents
Related Manuals for Viking E-30-PT
Summary of Contents for Viking E-30-PT
- Page 1 Some phone systems do not conform to analog telecom standards and might • Push to talk button not be compatible with the E-30-PT phones. For a detailed description of the telephone line specifications required for any of the E-30-PT phones, see •...
- Page 2 Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI 54016 (715) 386-8666...
- Page 3 Caution: When warm air comes in contact with cold surfaces, such as outside walls and conduits, it causes condensation. To prevent condensation from accumulating inside the E-30-PT always bring conduit into the bottom of the unit. If this is not possible, drill a 1/4” diameter hole in the bottom of the gray plastic box.
- Page 4 Step 2. From a Touch Tone phone call the line attached to the E-30-PT. Step 3. When the E-30-PT answers, enter the 6-digit security code (factory set to 845464 - see section C). A double beep should then be heard indicating you have entered the programming mode.
- Page 5 (memory location #19) The security code allows the user/installer to program the E-30-PT phone while DIP switch 3 is in the ON (normal) posi- tion. The factory set security code is 845464 (V-I-K-I-N-G). It is recommended that the factory set security code be changed.
- Page 6 2, 3, 4...9 rings respectively abled in the factory default. Setting E - Dial Next Number on Busy If enabled and a busy is detected, the E-30-PT phone will dial the next pro- Touch Tone Setting E grammed speed dial number, and continue to cycle through the emergency num- Disabled bers until a call is completed.
- Page 7 G. Assisted Programming When attempting to program the E-30-PT phone, if the phone number of the line it is connected to is not known, the phone can be set to automatically call Viking technical support for assistance. With DIP switch 3 set to OFF (programming mode), pushing the CALL button will cause the E-30-PT phone to call Viking, whether it be connected directly to a CO line, or behind a "dial 9"...
- Page 8 Tone command (Q#). If programmed to auto-answer, the E-30-PT will also answer any incoming call. Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information.
Need help?
Do you have a question about the E-30-PT and is the answer not in the manual?
Questions and answers