FingerTec Keylock 8800 Quick Start Manual

Quick Start Guide
• Keylock 8800
Backup Battery Connector
LCD Screen
Keypad and
Card Induction
Area
Fingerprint Scanner
Handle
Keyhole
Battery Slots
USB Port
1
Setting the Date and Time


Press OK/Menu to turn on the Keylock 8800

Press OK/Menu again to access the Main Menu

Select Option > System Option

Press UP or DOWN to adjust the value > Press
next input > Press OK to save setting > Press
2
Enrollments of Fingerprint/Cards
The first user enrolled into the Keylock 8800 is automatically assigned as the
Administrator. His/her fingerprint verification will be required to access the
Menu screen.


Press OK/Menu to turn on the Keylock 8800

Press OK/Menu again to access the Main Menu

Select User Manage > Select
(Follow the instruction given on-screen).
• To enroll normal users with fingerprints

Press OK/Menu to turn on the Keylock 8800

Hold OK/Menu again until you see "Admin Affirm" display on screen.

Verify Administrator fingerprint to gain access into Main Menu.

Select User Manage > Select
instruction given on-screen).
• To enroll normal users with cards

P ress OK/Menu to turn on the Keylock 8800

Hold OK/Menu again until you see "Admin Affirm" display on screen.

Verify Administrator fingerprint to gain access into Main Menu.

Select User Manage > Select
on-screen).
The Quick Start Guide is intended to provide the user with simple instructions on how to
setup the FingerTec terminal date/time and communication as well as to perform
fingerprint and card enrolment and verification. For more details on other topics of
terminal management, refer to the terminal's hardware user manual available in the
package or online at http://info.fingertec.com/keylock8800-3
> Select Set Date/Time > Press OK
OK/Menu to move to
ESC to return to Main menu.
Enroll Admin > Select Supervisor > Enroll FP
Enroll User > Enroll FP (Follow the
Reg RFID (Follow the instruction given